Home > PAINT & SUNDRIES > PAINT & STAINS > WATERPROOFERS & SEALERS > CONCRETE SEALERS
Sort By:
1 2 3
SEALER ACRYLIC SOLVENT GLO CLR
Dyco PAVER SEALER DYC7200/1 Waterproofing Sealer, Gloss, Liquid, Clear, 1 gal
Suggested Retail: $49.99

Dyco? Paver Sealer? is a solvent acrylic, "non-yellowing" water-proofing sealer designed to seal and protect bare/non-sealed cement pavers. Paver Sealer? gives a wet look appearance while enhancing the true colors of the paver. Paver Sealer? resists tire markings, cracking and peeling. Paver Sealer? is easy to apply and provides a mildew-resistant barrier. Dyco? 7200 cement Paver Sealer? is a solvent acrylic, non-yellowing clear sealer for sealing non-sealed or coated pavers. Paver Sealer? gives a wet look and enhances the true color of the paver. How to determine if your pavers have been sealed with a latex water base sealer: Test the surfaces by pouring a small amount of water on the surface. If it penetrates quickly, the surface is porous and ready for 7200 Paver Sealer?. If it does not and takes 2 to 20 min to penetrate, then do not apply 7200 Paver Sealer?. more info
CONCRETE WATER REPELLENT 1GA
Damtite 06350 Shield Penetrating Water Repellent, Clear, 1 gal, Bottle
Suggested Retail: $52.99

Safe, odorless, clear penetrating sealer. Protects against water, ice and salt damage. more info
United Gilsonite 22113 Masonry Waterproofer
SEALER MSNRY INT EXT NATL GAL - Case of 2
Suggested Retail: $64.99

DRYLOK? natural look sealer is a non-yellowing protective coating that can be used as a sealer or concrete curing membrane. As a sealer, DRYLOK? natural look sealer penetrates deep to seal and protect masonry against acids, alkalis, road salts, de-icing compounds, household cleaners, gasoline, oil and weathering. Protects against dusting, staining and spalling. As a concrete hardener, When applied to freshly poured concrete, after the surface has set for 24 hrs and excess water has been removed, DRYLOK? natural look sealer will control water evaporation resulting in maximum concrete hardness. more info
FBRWL SURF BONDING CEM GR 50LB
Damtite FiberWall 04852 Surface Bonding Cement, Gray, Powder, 50 lb Pail
Suggested Retail: $67.99

FiberWall? is an alkali-resistant, fiberglass-reinforced, Portland cement-base surface bonding cement with sand, used for construction of concrete block walls by dry-stack (without mortar). It is also ideal to waterproof, strengthen, rehabilitate, reinforce, restore and beautify various existing deteriorating surfaces, including chimneys, retaining walls and other concrete, brick, stone, tile or stucco areas above and below grade, on the interior and exterior. more info
FBRWL SURF BONDING CEM WH 50LB
Damtite FiberWall 04851 Surface Bonding Cement, White, Powder, 50 lb Pail
Suggested Retail: $69.99

FiberWall? is an alkali-resistant, fiberglass-reinforced, Portland cement-base surface bonding cement with sand, used for construction of concrete block walls by dry-stack (without mortar). It is also ideal to waterproof, strengthen, rehabilitate, reinforce, restore and beautify various existing deteriorating surfaces, including chimneys, retaining walls and other concrete, brick, stone, tile or stucco areas above and below grade, on the interior and exterior. more info
PROTECTOR CONCRETE CLEAR 1GAL
PROTECTOR CONCRETE CLEAR 1GAL - Case of 2
Suggested Retail: $84.99

Just like natural and man-made stone, concrete and masonry are porous materials. They will start to break down, dust, pit, crack and/or stain easily when subjected to weather, water, oil and UV rays. The only way to prevent damage and deterioration is to protect surfaces with a good quality sealer. Latex base Drylok? Concrete Protector provides clear, weatherproof protection against deterioration caused by de-icing salts, household cleaners, acid, gasoline, oil and weathering. Formulated with our exclusive SALTLOK? Technology, it penetrates into the surface and provides superior resistance to unsightly efflorescence stains (salt deposits) that are often visible on brick, block and poured concrete surfaces. more info
SEALER CONCRETE CLEAR GAL
Henry 16376 Concrete Sealant, Liquid, Clear, 1 gal, Can
Suggested Retail: $89.99

Henry? 635 is a high-performance, high solids concrete sealer that is easy to apply, quick drying, nonflammable and UV stable. Applied at a minimum of two coats, Henry 635 is designed to protect all exterior absorbent concrete and masonry surfaces on residential and commercial applications, including driveways, sidewalks, patios, courtyards, walkways, pool decks and most vertical concrete surfaces. It is especially suited to seal Henry toppings and the gray version can be used to create a uniform appearance over both a repaired area and the adjacent concrete or masonry surfaces. Henry 635 is durable and abrasion-resistant when applied properly. more info
SEALER CONCRETE GRAY GAL
Henry 16377 Concrete Sealant, Liquid, Gray, 1 gal, Can
Suggested Retail: $89.99

Henry? 635 is a high-performance, high solids concrete sealer that is easy to apply, quick drying, nonflammable and UV stable. Applied at a minimum of two coats, Henry 635 is designed to protect all exterior absorbent concrete and masonry surfaces on residential and commercial applications, including driveways, sidewalks, patios, courtyards, walkways, pool decks and most vertical concrete surfaces. It is especially suited to seal Henry toppings and the gray version can be used to create a uniform appearance over both a repaired area and the adjacent concrete or masonry surfaces. Henry 635 is durable and abrasion-resistant when applied properly. more info
SEALER HI-GLOSS LATEX BASE
SEALER HI-GLOSS LATEX BASE - Case of 2
Suggested Retail: $97.99

DRYLOK? WetLook high-gloss sealer Just like natural and man-made stone, concrete and masonry are porous materials that will start to break down, dust, pit, crack and/or stain when subjected to weather, water, oil and UV rays. The only way to prevent damage and deterioration is to protect your surfaces with a good quality sealer. DRYLOK? wet look high-gloss sealer is a clear, non-yellowing, water-base sealer formulated for use on horizontal and vertical masonry surfaces where a high-gloss, WetLook finish is desired. more info
SEALER CONCRETE WET LOOK 1 GAL
SEALER CONCRETE WET LOOK 1 GAL - Case of 2
Suggested Retail: $119.99

ROCKSOLID? wet look concrete sealer seals and protects concrete and masonry surfaces from the damaging effects of water, chemicals and UV light. The water-base, film-forming formula provides a protective barrier to keep water out, protect against stains and extend the life of your concrete while leaving a wet look, high-gloss finish. more info
   
 
1 2 3