|
|
|
|
|
|
DEWALT 08293-PWR Mixing Nozzle, Plastic, For: AC100+ Gold 10 oz and 12 oz Cartridge System
|
|
|
DEWALT Mixing Nozzle, Plastic, Dimensions: 8 in L, Suitable for: AC100+ Gold 10 oz and 12 oz Cartridge System
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie ETB ETB6 Hole Cleaning Brush, 4 in L Brush, 16 in OAL, Nylon Bristle
|
|
|
Brushes are used for cleaning drilled holes prior to adhesive anchor installation. Brushes have a twisted wire handle with nylon bristles. For use with Simpson Strong-Tie? ET-3G? adhesives.
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie ETB ETB8 Hole Cleaning Brush, 4 in L Brush, 16 in OAL, Nylon Bristle
|
|
|
Brushes are used for cleaning drilled holes prior to adhesive anchor installation. Brushes have a twisted wire handle with nylon bristles. For use with Simpson Strong-Tie? ET-3G? adhesives.
|
|
|
|
|
|
|
|
|
|
Adhesives Technology T3438CK Mixing Nozzle Kit, For: 22 oz Ultra Bond Epoxy Systems
|
|
|
Nozzle kit for Ultrabond epoxy 22 oz system. Hi-Flow nozzles reduce waste while increasing flow. 15 in length snaps off to 10 in if required. 3/8 in Dia at tip. Built-in mixing nut allows for fast and easy attachment to cartridge.
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie AMN19Q AMN19Q-RP5 Adhesive Mixing Nozzle, For: AT-XP Adhesive Products
|
|
|
Simpson Strong-Tie? AMN19Q mixing nozzles ensure proper proportioning and mixing of Simpson Strong-Tie? acrylic formulations. Required for compliance with manufacturer's installation instructions.
|
|
|
|
|
|
|
|
|
|
Red Head A7+ Series 07111 Anchoring Adhesive, Beige/Gray, 10 oz
|
|
|
Red Head A7+ is a high-strength, fast-cure adhesive that is designed to securely anchor threaded rod and rebar to cured concrete and masonry. A7+ is one of the most versatile anchoring solutions on the market, suitable for use in an extremely wide range of applications and environmental conditions.
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie AT3G AT3G10 High-Strength Hybrid Acrylic Adhesive, Paste, 9.5 oz Cartridge, Coaxial Cartridge
|
|
|
AT-3G? is a hybrid, acrylic-based adhesive for anchoring threaded rod and rebar into cracked and uncracked concrete. Ideal for cold weather and wet concrete applications, AT-3G? dispenses easily and offers a fast curing time for same-day bolt up. It can be specified for a wide range of in-service temperatures and maintains its strong bond strength in extreme environments for ultimate design and jobsite flexibility. Tested and code compliant with the IBC and IRC, AT-3G? hybrid adhesive is easy to install with the conventional blow-brush-blow hole-cleaning method.
|
|
|
|
|
|
|
|
|
|
Protective Coating PC-Concrete 72561 Epoxy Adhesive, White, Paste, 250 mL, Cartridge
|
|
|
PC-CONCRETE? anchoring and crack filling epoxy is the epoxy chosen to repair cracks in warehouse and factory floors. Dispense and apply using a standard size caulking gun. Cures hard enough to drive over within 3 hrs at standard temperature. Nothing stronger for your anchoring applications. PC-CONCRETE? is a two-component (1:1 ratio), 100% solids, high modulus and structural epoxy paste. PC-CONCRETE? is a solvent-free, no-odor, high strength, moisture insensitive epoxy system. The resin and hardener are uniformly dispensed from a 9 oz cartridge system and mixed through a mixing nozzle using a standard size caulking gun.
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie EMN22I-RP5 Adhesive Mixing Nozzle, For: 22 and 56 oz Epoxy Adhesive Cartridges
|
|
|
An 18-element mixing nozzle with integrated nut for use with 10 oz, 22 oz and 56 oz epoxy adhesive cartridges.
|
|
|
|
|
|
|
|
|
|
Sika AnchorFix-1 Series 112729 Anchoring Adhesive, 10.1 oz, Cartridge
|
|
|
Sika? AnchorFix-1 adhesive anchoring system has been specially formulated as a high-performance, two-component adhesive anchor system for threaded and reinforcing bars in uncracked concrete.
|
|
|
|
