|
|
|
|
|
|
FIXTURE RECESSED ICAN ALUM 6IN
|
|
|
"For use with 120 volt Incandescent lamps. Aluminum construction for greater heat dissipation. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2"" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24"" joist span. Can be field shortened for 12"" joist. Installation: 7-1/2"" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 2"" thick. Requires 6-1/2"" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated."
|
|
|
|
|
|
|
|
|
|
Halo H7RICT Recessed Housing, 6 in Dia Recessed Can, Aluminum
|
|
|
The H7 family of recessed housings are the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H7RICT is designed for installations where the housing will be in direct contact with insulation. H7RICT may be converted into Air-Tite? installation when used with Air-Tite? trims.
|
|
|
|
|
|
|
|
|
|
Halo H7ICAT Recessed Housing, 6 in Dia Recessed Can, Aluminum
|
|
|
The H7 recessed housing is the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. H7ICAT is for installations where the housing will be in direct contact with insulation and also meet restricted air flow requirements.
|
|
|
|
|
|
|
|
|
|
Halo 11888778 Light Housing, 6 in Dia Recessed Can, Aluminum
|
|
|
The H750RICAT is a dedicated LED Remodel housing for use with Halo H7 Collection 600 900 Series LED modules. The H750RICAT is designed for remodel into insulated ceilings and can be in direct contact with ceiling insulation. This AIR-TITE? housing design prevents airflow between attic and living areas and saves on both heating and air conditioning costs. The H750RICAT LED connector system provides high efficiency code compliance when used with Halo H7 Collection 600 and 900 Series LED modules.
|
|
|
|
|
|
|
|
|
|
Halo H99TAT Recessed Housing, 4 in Dia Recessed Can, Steel
|
|
|
The H99TAT is a small aperture Non-IC AIR-TITE? housing for providing accent and task lighting. The H99TAT is designed for use in non-insulated ceiling or for insulated ceilings but insulation must be kept 3 in from all sides of the housing. Non-IC Housing is AIR-TITE? but insulation must be kept 3 in away from all sides of housing.
|
|
|
|
|
|
|
|
|
|
Halo H7RICAT Recessed Housing, 6 in Dia Recessed Can, Aluminum
|
|
|
The H7 family of recessed housings are the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H7RICAT housing is designed for installations where the housing will be in direct contact with insulation and also meet restricted air flow requirements.
|
|
|
|
|
|
|
|
|
|
Halo H99RTAT Recessed Housing, 4 in Dia Recessed Can, Steel
|
|
|
The H99RTAT is a small aperture Non-IC AIR-TITE? housing for providing accent and task lighting. The H99RTAT is designed for use in non-insulated existing ceilings. Non-IC Housing is AIR-TITE? but insulation must be kept 3 in away from all sides of housing. For installation from below the ceiling.
|
|
|
|
|
|
|
|
|
|
Halo H99ICAT Recessed Housing, 4 in Dia Recessed Can, Aluminum
|
|
|
The H99ICAT is a small aperture IC AIR-TITE? housing for accent and task lighting. It is designed for use in insulated ceilings where it will be in direct contact with insulation. It is an AIR-TITE? housing designed to prevent air flow between living spaces and unconditioned areas.
|
|
|
|
|
|
|
|
|
|
FIXTURE RECESED IC AIR-TGT 6IN - Case of 6
|
Suggested Retail: $139.99
|
|
|
The H27ICAT housing is designed for use in shallow ceilings. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H27ICAT is designed for shallow ceilings where insulation is present. The H27ICAT housing is of Air-Tite construction and prevents airflow between conditioned spaces and unconditioned attic/plenum areas.
|
|
|
|
|
|
|
|
|
|
FIXTURE RECESS NON-IC SHW 6IN - Case of 6
|
Suggested Retail: $159.99
|
|
|
"For installations in non-insulated ceilings or where insulation can be kept 3"" from housing. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket allows the use of different lamp types and sizes as well as proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2"" knockouts and four Romex knockouts with integral strain relief. Plaster frame includes locking screw for hanger bars and cut outs for crimping hanger bars into position. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24"" joist span and can be field shortened for 12"" joist. Installation: 5-1/2"" height allows use in 2 x 6 joist construction. Housing accommodates ceilings up to 2"" thick. Requires 6-1/2"" ceiling opening. Ring fixture not included. Listings: UL Damp Locations. UL Feed Through. CSA Certified. IP Rated."
|
|
|
|
