|
|
|
|
|
Reliance Controls TF151W Generator Transfer Switch, 1-Phase, 15 A, 125 V, 1-Circuit, 1-Breaker, NEMA 5-15 Enclosure
|
Suggested Retail: $179.99
|
|
|
The Easy/Tran TF transfer switch is designed for the control of a single circuit, such as a forced-air furnace, in the event of a power failure. The attached 18 in flexible aluminum conduit is pre-wired and allows the TF to be easily connected at the circuit breaker panel or the furnace or at any point in between. Power can be supplied from a portable generator, inverter, RV generator, fuel cell or any standby source capable of producing sufficient current to operate the desired load. Uses standard grounded extension cord.
|
|
|
|
|
|
|
|
Reliance Controls Pro/Tran Series 30216A Transfer Switch, 1-Phase, 30 A, 120/250 V, 7-Circuit, 6-Breaker, Surface
|
Suggested Retail: $359.99
|
|
|
These indoor surface mount transfer switches are designed for fast installation in residential and commercial applications. The 18 in flexible conduit whip attaches easily to the load center and all wires are clearly marked. Simply select the circuits needed in an emergency and connect them to the Pro/Tran wire leads.
|
|
|
|
|
|
|
|
Reliance Controls Pro/Tran 2 Series R306A Transfer Switch, 1-Phase, 30/60 A, 125/250 V, 6, 3-Circuit, 6-Breaker
|
Suggested Retail: $439.99
|
|
|
The Reliance Pro/Tran 2 outdoor rated (NEMA 3R) transfer switches are ideal for outdoor installation in residential and commercial applications. The gasketed steel cabinet is powder-coated with a key lock door and keys and comes with a factory installed power inlet on the bottom to connect the generator cord. Included is a 16 in L of 1 in flexible non-metallic, liquid-tight conduit with fittings. Simply mount the cabinet, attach the conduit and feed the factory marked wires from the transfer switch into the load center. Select the load center circuits needed in an emergency and connect them to the wires leads from the transfer switch. Each cabinet includes five knockouts, one on each side and two in the back are combination 1/2 in, 3/4 in, 1 in knockouts and the one on the bottom is a combination 1/2 in, 3/4 in knockout. All Raintight Pro/Tran 2 transfer switches feature 1 in circuit breakers, power inlet and non-defeatable (break-before-make) double-throw switches. All 125/250 V models feature exclusive Reliance color coded wattmeter's.
|
|
|
|
|
|
|
|
Reliance Controls Pro/Tran Series 31406CRK Transfer Switch Kit, 1-Phase, 60 A, 120/250 V, 7-Circuit, 6-Breaker
|
Suggested Retail: $479.99
|
|
|
These indoor surface mount transfer switches are designed for fast installation in residential and commercial applications. The 18 in flexible conduit whip attaches easily to the load center and all wires are clearly marked. Simply select the circuits needed in an emergency and connect them to the Pro/Tran wire leads.
|
|
|
|
|
|
|
|
Connecticut Electric EGS10750G2KIT Transfer Switch Kit, 30 A, 240 V, 10 -Circuit
|
Suggested Retail: $479.99
|
|
|
Connecticut Electric "G2" series generator transfer switch kit featuring 30 A, 10 circuit "G2" series transfer switch, 30 A rainproof generator inlet box and 30 A, 10 ft power cord.
|
|
|
|
|
|
|
|
Reliance Controls Pro/Tran 2 Series 510C Transfer Switch, 1-Phase, 50 A, 120 V, 15-Circuit, Surface
|
Suggested Retail: $529.99
|
|
|
The Pro/Tran 2 is the next generation of Loadside? manual transfer switch by Reliance Controls. These indoor surface mount transfer switches are designed for fast installation in residential and commercial applications. The 16 in flexible conduit whip attaches easily to a knockout on the load center and all factory wires are clearly marked and colored for identification. Simply select the circuits needed in an emergency and connect them to the Pro/Tran two wire leads as instructed in the manual.
|
|
|
|
|
|
|
|
Reliance Controls Pro/Tran 2 R510A Transfer Switch, 1-Phase, 50/100 A, 125/250 V, 10-Circuit, 10-Breaker
|
Suggested Retail: $579.99
|
|
|
The Reliance Pro/Tran 2 outdoor rated (NEMA 3R) transfer switches are ideal for outdoor installation in residential and commercial applications. The gasketed steel cabinet is powder-coated with a key lock door and keys and comes with a factory installed power inlet on the bottom to connect the generator cord. Included is a 16 in L of 1 in flexible non-metallic, liquid-tight conduit with fittings. Simply mount the cabinet, attach the conduit and feed the factory marked wires from the transfer switch into the load center. Select the load center circuits needed in an emergency and connect them to the wires leads from the transfer switch. Each cabinet includes five knockouts, one on each side and two in the back are combination 1/2 in, 3/4 in, 1 in knockouts and the one on the bottom is a combination 1/2 in, 3/4 in knockout. All Raintight Pro/Tran 2 transfer switches feature 1 in circuit breakers, power inlet and non-defeatable (break-before-make) double-throw switches. All 125/250 V models feature exclusive Reliance color coded wattmeter's.
|
|
|
|
|
|
|
|
Reliance Controls 310CRK Transfer Switch Kit, 1-Phase, 30 A, 120/240 V, 10-Circuit, Surface
|
Suggested Retail: $599.99
|
|
|
The Pro/Tran 2 is the next generation of Loadside? manual transfer switch by Reliance Controls. These indoor surface mount transfer switches are designed for fast installation in residential and commercial applications. The 16 in flexible conduit whip attaches easily to a knockout on the load center and all factory wires are clearly marked and colored for identification. Simply select the circuits needed in an emergency and connect them to the Pro/Tran 2 wire leads as instructed in the manual.
|
|
|