FLEXIBLE GAS CONNECTORS

Home > PLUMBING > ROUGH PLUMBING SUPPLIES > GAS SUPPLY LINES > FLEXIBLE GAS CONNECTORS

Sort By:

1 2 3 ... 8

B and K Industries G014YE101124RP Gas Connectors

B & K G014YE101124RP Gas Connector, 1/2 in, MIP x FIP, Stainless Steel, Epoxy-Coated, 24 in L, 3/8 in OD

Suggested Retail: $10.99

CSA certified up to 0.05 psig, -40 to 150 deg operating temperature.

B and K Industries G014SS101118RP Gas Connectors

B & K G014SS101118RP Gas Connector, 1/2 in, MIP x FIP, Stainless Steel, 18 in L, 3/8 in OD

Suggested Retail: $10.99

CSA certified up to 0.05 psig, -40 to 150 deg operating temperature.

Brass Craft CSSD54-12 Gas Appliance Connectors

BrassCraft ProCoat Series CSSD54-12 Gas Connector, 1/2 x 1/2 in, Stainless Steel, 12 in L

Suggested Retail: $11.99

BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.

Brass Craft CSSL54-12 Gas Appliance Connectors

BrassCraft ProCoat Series CSSL54-12 Gas Connector, 1/2 x 1/2 in, Stainless Steel, 12 in L

Suggested Retail: $11.99

BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind, The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.