|
|
|
|
|
|
Zep ZUFSLR128 Floor Sealer, Milky White, 1 gal Bottle
|
|
|
Stain-resistant floor sealer produces a level, stain-resistant and clear gloss surface for high-traffic surfaces. Applying the sealer before a top coating or floor finish results in maximum strength improved shine and stain resistance. It can be stripped and reapplied as needed, making it ideal for use on a range of hard floors, including high-traffic vinyl, in businesses, offices and warehouses. The product covers up to 1500 sq-ft and produces a thin, even finish by mopping in a continuous figure-8 motion.
|
|
|
|
|
|
|
|
|
|
Zep ZUHTFF128 Floor Polish, 1 gal Can, Liquid, Mild Ammonia, Milk/Translucent White
|
|
|
High traffic floor polish gives a professional-grade floor finish for a range of hard floor surfaces. Its 20% solid formula provides a durable, high gloss shine that resists scuffs and heel marks and prevents slips. The low VOC (less than 1%) product requires little maintenance and is intended for use on interior floors such as rubber, asphalt, vinyl and sealed concrete. This is step 3 of the zap floor care 4 step program. It can be stripped and reapplied as needed.
|
|
|
|
|
|
|
|
|
|
Zep ZUWLFF128 Floor Polish, 1 gal Bottle, Liquid, Ammonia, Milky White
|
|
|
Polishing is the third step of the fourth step professional maintenance program. This pro grade formula leaves an attractive and glossy finish polish that resists heel marks and prevents slips in high traffic areas.
|
|
|
|
|
|
|
|
|
|
Zep ZUHTFF5G Floor Polish, 5 gal Can, Liquid, Mild Ammonia, Milk/Translucent White
|
|
|
High-traffic floor polish gives a professional grade floor finish for a range of hard floor surfaces. Its 20% solid formula provides a durable, high-gloss shine that resists scuffs and heel marks and prevents slips. The low VOC (less than 1%) product requires little maintenance and is intended for use on interior floors such as rubber, asphalt, vinyl and sealed concrete. This is step 3 of the zap floor care 4-step program. It can be stripped and reapplied as needed.
|
|
|
|
|
|
|
|
|
|
FINISH FLOOR ENHANCER 128OZ - Case of 4
|
Suggested Retail: $119.99
|
|
|
Restore 10 is a dual-purpose floor enhancer and buffing compound which restores the gloss and appearance to any floor. Use as a mop on floor restorer for high speed and propane burnishing programs and also as a spray buffing compound for high and low speed buffing. Can be used on any floor and will increase gloss, appearance and durability. Highly mark-resistant, it will harden, restore and reinvigorate finishes that are worn from repeated buffing and burnishing. Use of restore 10 creates a more even level of appearance and extend the life cycle of any finish, lowering the overall cost of floor maintenance.
|
|
|
|
|
|
|
|
|
|
SEALER FLOOR BASE 16 128OZ - Case of 4
|
Suggested Retail: $119.99
|
|
|
Base 16 is a water emulsion sealer for use on vinyl, resilient tile, linoleum, terrazzo, rubberized and other porous or worn floors. Base 16 fills pores and provide an optimal base for any water-based polymer floor finish. Excellent base for any floor maintenance program including high speed and propane. Enhances the gloss and improves the appearance, durability and performance of any floor finish. It will also extend the time between strip outs thereby reducing the cost of maintenance. Easily applied with a mop or applicator system. Dries quickly for rapid recoating.
|
|
|
|
|
|
|
|
|
|
nyco NL167-P5 Floor Finish, 5 gal, Liquid, Acrylic, White
|
Suggested Retail: $119.99
|
|
|
Hard coat 19 is a dynamically energized polymer floor coating for virtually all floors and floor maintenance programs. Deep rich, clear glossy appearance. Durable and mark-resistant, use as a seal and finish or recoat over existing floors. Excellent mark resistance, yet extremely buffable with extended wear and performance. Hard coat 19 provides long-lasting brilliance on all resilient tile, synthetic, rubber, linoleum and terrazzo floors. It will withstand repeated buffing and burnishing including propane machines.
|
|
|
|
|
|
|
|
|
|
FINISH FLOOR HARD COAT 128OZ - Case of 4
|
Suggested Retail: $149.99
|
|
|
Hard coat 19 is a dynamically energized polymer floor coating for virtually all floors and floor maintenance programs. Deep rich, clear glossy appearance. Durable and mark-resistant, use as a seal and finish or recoat over existing floors. Excellent mark resistance, yet extremely buffable with extended wear and performance. Hard coat 19 provides long-lasting brilliance on all resilient tile, synthetic, rubber, linoleum and terrazzo floors. It will withstand repeated buffing and burnishing including propane machines.
|
|
|
|
|
|
|
|
|
|
FINISH FLOOR PRO-ULTRA 128OZ - Case of 4
|
Suggested Retail: $159.99
|
|
|
Pro-ultra 22 is a high performance acrylic floor finish specifically designed for use all floor high speed buffing and burnishing programs. Pro-ultra 22 is ideal for frequent burnishing programs and is optimized for the speed and pad pressure of propane machines. It will provide a long-lasting mark-resistant finish with a brilliant deep gloss. Use on resilient tile, terrazzo and other floors that are frequently buffed and burnished. Easy-to-apply, dries quickly for rapid recoating. Great durability, gloss and mark resistance.
|
|
|
|
|
|
|
|
|
|
nyco NL175-P5 Floor Finish, 5 gal, Liquid, Acrylic Polymer, White
|
Suggested Retail: $159.99
|
|
|
Pro-ultra 22 is a high performance acrylic floor finish specifically designed for use all floor high speed buffing and burnishing programs. Pro-ultra 22 is ideal for frequent burnishing programs and is optimized for the speed and pad pressure of propane machines. It will provide a long-lasting mark-resistant finish with a brilliant deep gloss. Use on resilient tile, terrazzo and other floors that are frequently buffed and burnished. Easy-to-apply, dries quickly for rapid recoating. Great durability, gloss and mark resistance.
|
|
|
|
